Drone Density Altitude Calculator
From elevation, temperature and pressure, see how thin the air really is (density altitude) and how much more power a hover takes.

Height above sea level. The elevation shown in a map app is fine.
The sea-level pressure (QNH) from a weather app. Standard is 1013 hPa (29.92 inHg).
Results
Standard temperature at this altitude is 15°C; today is +15°C from standard.
The air is noticeably thinner than standard. Propeller efficiency and climb rate drop and motors work harder, so plan battery margins generously.
Results are based on your inputs and general assumptions, for reference only. Before a flight or trip, check the manufacturer's manual, your airline's guidance and local regulations.
How to use
- Pick your units and enter the takeoff site's elevation above sea level.
- Enter the air temperature. Midday ground temperature is the worst case, so use the forecast for your flight time.
- Enter the sea-level pressure (QNH) from a weather app or airport report. Leave the standard value if you do not know it.
- Read the density altitude and hover power change. If they are large, re-check payload, flight time and operating limits.
How it is calculated
Pressure altitude = elevation + (1013.25 − QNH) × 27 ft, and the standard temperature is 15 °C − 1.98 °C per 1,000 ft of pressure altitude. Density altitude is approximated as pressure altitude + 118.8 × (actual − standard temperature) ft, while the air density ratio comes from the International Standard Atmosphere (ISA) model.
Hover power is assumed to scale with the inverse square root of the air density ratio (a theoretical figure). Humidity is not included, so on a humid day the air is a little thinner than shown. Real performance varies by aircraft, so follow the manufacturer's specifications first.
Frequently asked questions
What is density altitude?
It restates today's air density as the altitude where standard air has the same density. Heat, low pressure and high ground all raise it, and the propellers then produce less lift.
Does it matter at sea level on a summer afternoon?
Yes. Even at sea level, air 15–20 °C above the 15 °C standard raises density altitude by roughly 1,500–2,000 ft. In heat, also check battery performance and temperature.
Is the hover power change exact?
No, it is a rough theoretical figure. Propeller design, speed and payload change the real result, so use it only as a comparison.
What if I do not know the QNH?
Leaving the standard 1013 hPa (29.92 inHg) still gives a rough result. For better accuracy, enter the sea-level pressure from a weather app.
Check weather and Kp before you fly
Once you have your numbers, check wind, temperature and the Kp index for your flight area on the dashboard.
Guides worth reading next
- Why Cold Weather Shortens Drone Flight Time and How to PlanDoes cold weather really drain your drone battery faster? Here's the science below 10°C (50°F), and how much shorter your flights get in freezing conditions.
- Extreme Heat: Drone Battery and Electronics PrecautionsWhy hot weather is more dangerous to a drone than most pilots assume: how sun-heated batteries, thermal throttling, and hot-car storage cut your safety margin.
- How to Extend Drone Flight TimeWhy published flight times are lab maxima, how speed, wind, cold and weight change real endurance, and the habits that give you a bigger battery margin.